SPECIFICATIONS

The multi up panels that are delivered to the MAM Service Centre need to be routed and must provide depth routings for chip installation. Before an order is accepted all details regarding size and configuration of the multi ups and data type for assembly coordinates will be double checked with you.

The embedding rate is up to 750 RFID chips per hour.



MAM Technical Parameters (Prototype)
Machine Dispenser RFID-Chip-Inserter
Machine dimensions
Width x height x depth, approx.:

2190 mm x 1900 mm x 1350 mm

2190 mm x 1900 mm x 1550 mm
Panel dimensions
Min. length x width x thickness:
Max. length x width x thickness:

450 mm x 380 mm x 1.6 mm
500 mm x 415 mm x 1.6 mm

450 mm x 380 mm x 1.6 mm
500 mm x 415 mm x 1.6 mm
Weight (approx.): 350 kg 350 kg
Power: Voltage: 230 V AC, 50 Hz
Power: 1.6 kVA
Control Voltage: 24 V
Backup Fuse: 20 A
Voltage: 230 V AC, 50 Hz
Power: 1.6 kVA
Control Voltage: 24 V
Backup Fuse: 20 A
Compressed air: Conduit: PU-Tubing
Outer diameter of connector: ∅ 8 mm
Air consumption: < 2 l / Panel at 20ºC
Operating pressure: 5-6 bar
Conduit: PU-Tubing
Outer diameter of connector: ∅ 8 mm
Air consumption: < 2 l / Panel at 20ºC
Operating pressure: 5-6 bar
Panel weight (max.): 2 kg 2 kg
Processing time: max. 4 secs per PCB
Time needed to feed a panel, read the job number,
calculate the offset value and loading coordinates: 12 secs
max. 6 secs per PCB
Time needed to feed a panel, read the job number,
calculate the offset value and loading coordinates: 12 secs
Operating temperature: +10 - +40 ºC +10 - +40 ºC
Noise emissions: during operation < 72 dB (A) during operation < 72 dB (A)


Data Sheets

RFID embedded options 03/2013 (PDF ≈ 1 MB)
RFID Service Centre - Flyer 09/2013 (PDF ≈ 1 MB)
Magic-PCB® Booklet 10/2013 (PDF ≈ 10 MB)